View LP101WS1-TLA2_4360116.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification 1 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 specification for approval 10.1 wsvga tft lcd title model lge customer *when you obtain standard approval, please use the above model name without suffix lp101ws1 *model tla2 suffix lg display co., ltd. supplier ) ) ( ( final specification preliminary specification please return 1 copy for your confirmation with your signature and comments. / / / signature approved by products engineering dept. lg display co., ltd prepared by reviewed by signature approved by g. j. kwon/ manager c. j. jun / manager p. a. choi / engineer www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 2 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 contents 23 precautions 9 22 packing form 8-2 10 7 interface connection 3-2 signal timing waveforms 3-5 packing 8 22 designation of lot mark 8-1 21 emc 7-2 25 appendix. enhanced extended display identification data a 21 safety 7-1 1 cover 2 contents 3 record of revisions 4 general description 1 5 absolute maximum ratings 2 electrical specifications 3 6 electrical charactreistics 3-1 8 lvds signal timing specifications 3-3 10 signal timing specifications 3-4 11 color input data refernece 3-6 12 power sequence 3-7 13 optical sfecifications 4 16 mechanical characteristics 5 20 reliablity 6 international standards 7 page item no www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 3 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 record of revisions - optical characteristics 13 jan.13.2009 1.0 - led power(@ pin map) 7 oct. 09. 2008 0.2 - color coordinates 13 - bl_on(@ pin map), 7 nov.18.2008 0.3 - gray scale specification 14 - edid ver first draft (preliminary specification) all july. 11. 2008 0.0 description page revision date revision no www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 4 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 1. general description general features glare treatment of the front polarizer surface treatment 6-bit, 262,144 colors color depth 1024 horiz. by 576 vert. pixels rgb strip arrangement pixel format 200 cd/m 2 (typ.5 point) luminance, white total 2.46 watt(typ.) @ lcm circuit 0.82 watt(ty p.), b/l input 1.64 watt(typ.) (w/o led driver) power consumption 190g (max.) weight transmissive mode, normally white display operating mode yes rohs comply 0.2175mm 0.2175 mm pixel pitch 235(h) 143(v) .5.2(d,max.) [mm] outline dimension 10.1 inches diagonal active screen size the lp101ws1 is a color active matrix liquid crysta l display with an integral led backlight system. th e matrix employs a-si thin film transistor as the act ive element. it is a transmissive type display oper ating in the normally white mode. this tft-lcd has 10.1inche s diagonally measured active display area with wsvga resolution(1024 horizontal by 576 vertical pi xel array). each pixel is divided into red, green a nd blue sub-pixels or dots which are arranged in verti cal stripes. gray scale or the brightness of the su b-pixel color is determined with a 6-bit gray scale signal for each dot, thus, presenting a palette of more th an 262,144 colors. the lp101ws1 has been designed to apply the interfa ce method that enables low power, high speed, low emi. the lp101ws1 is intended to support applications wh ere thin thickness, low power are critical factors and graphic displays are important. in combination with the vertical arrangement of the sub-pixels, the lp101ws1 characteristics provide an excellent flat display for office automation products such as note book pc. control & data power edid signal & power tft-lcd panel (1024 x 576) 1 576 1 1024 cn 1 user connector 40 pin power block edid block gip(gate in panel) source driver circuit led backlight ass y lvds & timing control block pwm & vbl www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 5 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 2. absolute maximum ratings the following are maximum values which, if exceeded , may cause faulty operation or damage to the unit. table 1. absolute maximum ratings storage operation 10 20 30 40 50 60 70 80 0 -20 dry bulb temperature [ ] 10 % 20 % 40 % 60 % 90% 80% 0 10 20 30 40 50 60 wet bulb temperature [ ] humidity[(%)rh] units 1 %rh 90 10 h op operating ambient humidity 1 %rh 90 10 h st storage humidity 1 c 60 -20 h st storage temperature 1 c 50 0 t op operating temperature at 25 5 c vdc 4.0 -0.3 vcc power input voltage max min parameter notes values symbol note : 1. temperature and relative humidity range a re shown in the figure below. wet bulb temperature should be 39 c max, and no condensation of water. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 6 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 3. electrical specifications 3-1. electrical characteristics table 2. electrical characteristics note) 1. the specified current and power consumption are under the vcc = 3.3v , 25 , fv = 60hz condition whereas mosaic pattern is displayed and fv is the f rame frequency. 2. this impedance value is needed to proper display and measured form lvds tx to the mating connector. 3. the typical operating current is for the typica l surface luminance (l wh ) in optical characteristics. i led is the current of each leds string, led backlight has 3 strings on it. 4. the led power consumption shown above does not i nclude power of external led driver circuit for typical current condition. 5. the life time is determined as the time at which brightness of led is 50% compare to that of initia l value at the typical led current. the lp101ws1 requires two power inputs. one is emp loyed to power the lcd electronics and to drive the tft array and liquid crystal. the second input whic h powers the led bl. watt 0.36 0.31 - p driver led driver ( @5v ) 4 watt 1.74 1.64 - p bl power consumption led backlight ( with led driver ) : v 30.6 28.8 - v led operating voltage 3 ma 19 - i led operating current per string 5 hrs - - 10,000 life time 2 ohm 110 100 90 zm differential impedance 1 watt 0.93 0.82 - pc power consumption v dc 3.6 3.3 3.0 vcc power supply input voltage 1 ma 280 250 - i cc power supply input current module : parameter symbol max typ min notes unit values www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 7 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 3-2. interface connection table 3. module connector pin configuration (cn1) this lcd employs one interface connection, a 40 pin connector is used for the module electronics interf ace. the electronics interface connector is a model 2045 5-040e-0* manufactured by i-pex. 1, interface chips 1.1 lcd : siw, 1port including lvds receiver 1.2 system : * pin to pin compatible with lvds 2. connector 2.1 lcd :i-pex 20455-040e-0* (locking type) or equivalent 2.2 mating : 2.3 connector pin arrangement 1 40 [lcd module rear view] led ground vled_gnd 31 led ground vled_gnd 32 led ground vled_gnd 33 connector test/no connection(reserved) ct2/nc 34 system pwm signal input s_pwmin 35 led enable[note 1] bl_on 36 no connection nc 37 5v led power supply vled 38 no connection nc 30 5v led power supply vled 39 no connection nc 20 ground gnd 19 lvds differential clock input rxclkin+ 18 lvds differential clock input rxclkin- 17 ground gnd 16 lvds differential data input rxin2+ 15 lvds differential data input rxin2- 14 ground gnd 13 lvds differential data input rxin1+ 12 lvds differential data input rxin1- 11 5v led power supply vled 40 +3.3v power supply vdd 2 +3.3v power supply vdd 3 +3.3v edid power v edid 4 no connection nc 5 edid clock input clk edid 6 edid data input data edid 7 lvds differential data input rxin0+ 9 connector test/no connection(reserved) ct1/nc 1 lvds differential data input rxin0- 8 ground gnd 10 ground gnd 22 no connection nc 23 no connection nc 24 ground gnd 25 no connection nc 26 no connection nc 27 ground gnd 28 no connection nc 29 notes description symbol pin nc no connection 21 [note 1] on: 2.0v ,off:0~0.4v www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 8 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 notes unit max min symbol description 85mhz > fclk 65mhz ps + 400 - 400 t skew lvds clock to data skew margin - - - 65mhz > fclk 25mhz % 3 - f dev maximum deviation of input clock frequency during ssc khz 200 - f mod maximum modulation frequency of input clock during ssc - 1/7 - 600 t clk + 1/7 t skew_eo lvds clock to clock skew margin (even to odd) ps + 600 t skew - v 2.1 0.3 v in lvds input voltage range - v 1.8 0.6 v cm lvds common mode voltage - mv 600 100 |v id | lvds differential voltage notes unit max min symb ol description 3-3-1. dc specification 3-3-2. ac specification 3-3. lvds signal timing specifications www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 9 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 < clock skew margin between channel > < lvds data format > 3-3-3. data format - lvds 1 port < spread spectrum > time f center f max f min f mod 1 f center * f dev freq. g0 r5 r4 r3 r2 r1 r0 b1 b0 g5 g4 g3 g2 g1 de vsync hsync b5 b4 b3 b2 x b7 b6 g7 g6 r7 r6 r1 r0 g2 g1 b3 b2 r7 r6 g0 b1 de x current (nth ) cycle r5 r4 b0 g5 vsync hsync b7 b6 r3 r2 g4 g3 b5 b4 g7 g6 previous (n-1)th cycle next (n+1)th cycle rclk+ ra+/- rb+/- rc+/- rd+/- www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 10 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 3-4. signal timing specifications table 5. timing table this is the signal timing required at the input of the user connector. all of the interface signal ti ming should be satisfied with the following specifications and spe cifications of lvds tx/rx for its proper operation. 3-5. signal timing waveforms condition : vcc =3.3v low: 0.3vcc high: 0.7vcc data enable, hsync, vsync hsync data enable vsync data enable t wh t hp t hfp t hbp t vp t wv t vbp t vfp t wha t wva t clk 0.5 vcc dclk 576 576 576 t wva width-active 1024 1024 1024 t wha width-active tclk 120 80 40 t hbp horizontal back porch 64 48 32 t hfp horizontal front porch thp 12 9 6 t vbp vertical back porch 5 3 1 t vfp vertical front porch thp 602 593 584 t vp period 9 5 1 t wv width 48 32 16 t wh width tclk 1256 1184 1112 thp period hsync vsync data enable mhz 47.2 42.2 37.2 f clk frequency dclk note unit max typ min symbol item www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 11 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 3-6. color input data reference the brightness of each primary color (red,green and blue) is based on the 6-bit gray scale data input for the color ; the higher the binary input, the brighter t he color. the table below provides a reference for color versus data input. table 7. color data reference 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (00) green 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 green (01) ... 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 green (62) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 green (63) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (00) red 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 red (01) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 red (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 red (63) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 blue (01) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (62) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 blue (63) blue (00) white yellow magenta cyan blue green red black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 basic color 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 blue msb lsb green msb lsb red msb lsb b 5 b 4 b 3 b 2 b 1 b 0 g 5 g 4 g 3 g 2 g 1 g 0 r 5 r 4 r 3 r 2 r 1 r 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue color input color data www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 12 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 3-7. power sequence note) 1. valid data is data to meet 3-3. lvds signal tim ing specifications 2. please avoid floating state of interface signal at invalid period. 3. when the interface signal is invalid, be sure to pull down the power supply for lcd vcc to 0v. 4. led power must be turn on after power supply for lcd and interface signal are valid. (ms) - - 400 t 7 (ms) 10 - 0 t 6 (ms) 50 - 0 t 5 (ms) - - 200 t 4 (ms) - - 200 t 3 (ms) 50 - 0 t 2 (ms) 10 - 0.5 t 1 max. typ. min. units value parameter table 7. power sequence table t 6 90% 10% 10% 0v 90% t 1 t 2 t 5 valid data 0v off off led on t 7 t 3 t 4 interface signal, v i (lvds signal of transmitter) led power (vled,bl_on,s_pwmin signal :refer to table 3.) power supply for lcd (vcc) www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 13 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 4. optical specification fig. 1 optical characteristic measurement equipment and method table 8. optical characteristics ta=25 c, vcc=3.3v, f v =60hz, f clk = 42.2mhz, i bl = 19 ma 5 viewing angle color coordinates 4 ms 25 16 - tr r + tr d response time 0.098 0.158 0.128 0.098 by 0.283 0.343 0.313 0.283 wx white y axis, down ( f =270 ) y axis, up ( f =90 ) x axis, left ( f =180 ) x axis, right( f =0 ) degree - - 30 q r degree - - 30 q l degree - - 10 q u degree - - 20 q d blue 0.299 0.359 0.329 0.299 wy 6 2.2 gray scale green red 0.301 0.361 0.331 0.301 gx 0.516 0.576 0.546 0.516 gy 0.558 0.618 0.588 0.558 rx 0.317 0.377 0.347 0.317 ry 3 1.6 1.4 - d white luminance variation 0.124 0.184 0.154 0.124 bx max typ min 1 - - 300 cr contrast ratio 2 cd/m 2 - 200 170 l wh surface luminance, white parameter symbol notes units values lcd module optical stage(x,y) pritchard 880 or equivalent 50cm optical characteristics are determined after the un it has been on and stable for approximately 30 min utes in a dark environment at 25 c . the values specified are at an approximate distan ce 50cm from the lcd surface at a viewing angle of f and q equal to 0 . fig. 1 presents additional information concerning t he measurement equipment and method. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 14 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 100 l63 72.78 l55 9.01 l23 19.84 l31 34.84 l39 52.65 l47 3.41 l15 0.89 l7 0.25 l0 luminance [%] (typ) gray level note) 1. contrast ratio(cr) is defined mathematically as surface luminance with all white pixels contrast ratio = surface luminance with all black pixels 2. surface luminance is the average of 5 point acro ss the lcd surface 50cm from the surface with all pixels displaying white. for more information see fig 1. l wh = average(l 1 ,l 2 , l 5 ) 3. the variation in surface luminance , the panel t otal variation ( d white ) is determined by measuring l n at each test position 1 through 13 and then defined as followed numerical formula. for more information see fig 2. maximum(l 1 ,l 2 , l 13 ) d white = minimum(l 1 ,l 2 , l 13 ) 4. response time is the time required for the displ ay to transition from white to black (rise time, tr r ) and from black to white(decay time, tr d ). for additional information see fig 3. 5. viewing angle is the angle at which the contrast ratio is greater than 10. the angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to t he lcd surface. for more information see fig 4. 6. gray scale specification * f v = 60hz www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 15 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 fig. 3 response time the response time is defined as the following figur e and shall be measured by switching the input sign al for black and white. tr r tr d 100 90 10 0 % optical response white black white fig. 2 luminance : active area a : h/4 mm b : v/4 mm points: 13 points h,v active area 1 3 2 5 4 h a b v 6 7 8 9 10 11 12 13 10mm 10mm fig. 4 viewing angle normal y eye f q f = 0 , right f = 180 , left f = 270 , down f = 90 , up www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 16 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 5. mechanical characteristics the contents provide general mechanical characteris tics for the model lp101ws1. in addition the figure s in the next page are detailed mechanical drawing of the lcd. 125.28 mm vertical glare treatment of the front polarizer surface treatment 190g (max.) weight 128.70 mm vertical 143.0 0.5 mm vertical 5.2mm (max) thickness 222.72 mm horizontal active display area 226.00 mm horizontal bezel area 235.0 0.5 mm horizontal outline dimension www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 17 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 18 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 19 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 [ detail description of side mounting screw ] notes : 1. screw plated through the method of non-e lectrolytic nickel plating is preferred to reduce possibility that results in vertical and/ or horizontal line defect due to the conductive particles from screw surface. * mounting screw length (a) = 1.5(min) /1.8(max) * mounting screw hole depth (b) = 1.8(min) * mounting hole location : 2.8(typ.) * torque : 2.0 kgf.cm(max) (measurement gauge : torque meter) section a-a www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 20 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 6. reliability environment test condition { result evaluation criteria } there should be no change which might affect the pr actical display function when the display quality test is conducted under normal operating condition. 0 ~ 10,000 feet (3,048m) 24hr 0 ~ 40,000 feet (12,192m) 24hr altitude operatin g storage / shipment 7 half sine wave, 180g, 2ms one shock of each six faces(i.e. run 180g 6ms for all six faces) shock test (non-operating) 6 sine wave, 10 ~ 500 ~ 10hz, 1.5g, 0.37oct/min 3 axis, 1hour/axis vibration test (non-operating) 5 ta= 0 c, 240h low temperature operation test 4 ta= 50 c, 50%rh, 240h high temperature operation test 3 ta= -20 c, 240h low temperature storage test 2 ta= 60 c, 240h high temperature storage test 1 conditions test item no. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 21 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 7. international standards 7-1. safety 7-2. emc a) ansi c63.4 methods of measurement of radio-nois e emissions from low-voltage electrical and electrical equipment in the range of 9khz to 40ghz. american national standards institute(ansi), 1992 b) c.i.s.p.r limits and methods of measurement of radio interface characteristics of information technology equipment. international special committ ee on radio interference. c) en 55022 limits and methods of measurement of r adio interface characteristics of information technology equipment. european committee for electr otechnical standardization.(cenelec), 1998 ( including a1: 2000 ) a) ul 60950-1:2003, first edition, underwriters lab oratories, inc., standard for safety of information technology equip ment. b) can/csa c22.2, no. 60950-1-03 1 st ed. april 1, 2003, canadian standards association, standard for safety of information technology equip ment. c) en 60950-1:2001, first edition, european committee for electrotechnical standardiza tion(cenelec) european standard for safety of information technol ogy equipment. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 22 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 8. packing 8-1. designation of lot mark a) lot mark a b c d e f g h i j k l m a,b,c : size(inch) d : year e : month f ~ m : serial no. note 1. year 2. month mark year 0 2010 6 2006 7 2007 8 2008 9 2009 4 2004 5 2005 3 2 1 2003 2002 2001 b nov mark month a oct 6 jun 7 jul 8 aug 9 sep 4 apr 5 may c 3 2 1 dec mar feb jan b) location of lot mark serial no. is printed on the label. the label is at tached to the backside of the lcd module. this is subject to change without prior notice. 8-2. packing form a) package quantity in one box : 40 pcs b) box size : 395mm 390mm 309mm www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 23 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 9. precautions please pay attention to the followings when you use this tft lcd module. 9-1. mounting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so t hat uneven force (ex. twisted stress) is not applie d to the module. and the case on which a module is mounted s hould have sufficient strength so that external force is not transmitted directly to the module. (3) please attach the surface transparent protectiv e plate to the surface in order to protect the pola rizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials fo r the cover case are not desirable because the form er generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit b reak by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizer s with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothe s with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth.(some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gen tly with absorbent cotton or other soft materials l ike chamois soaks with petroleum benzene. normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possi ble. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2. operating precautions (1) the spike noise causes the mis-operation of cir cuits. it should be lower than following voltage : v= 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lo wer temperature, it becomes longer.) (3) brightness depends on the temperature. (in lowe r temperature, it becomes lower.) and in lower temperature, response time(required ti me that brightness is stable after turned on) becom es longer. (4) be careful for condensation at sudden temperatu re change. condensation makes damage to polarizer o r electrical contacted parts. and after fading conden sation, smear or spot will occur. (5) when fixed patterns are displayed for a long ti me, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference sha ll be done by system manufacturers. grounding and shieldi ng methods may be important to minimized the interference. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 24 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make c ertain that treatment persons are connected to ground through w rist band etc. and dont touch interface pin direct ly. 9-3. electrostatic discharge control strong light exposure causes degradation of polariz er and color filter. 9-4. precautions for strong light exposure 9-5. storage (1) when the protection film is peeled off, static electricity is generated between the film and polar izer. this should be peeled off slowly and carefully by p eople who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) the protection film is attached to the polarize r with a small amount of glue. if some stress is ap plied to rub the protection film against the polarizer du ring the time you peel off the film, the glue is apt to remain on the polarizer. please carefully peel off the protection film witho ut rubbing it against the polarizer. (3) when the module with protection film attached i s stored for a long time, sometimes there remains a very small amount of glue still on the polarizer af ter the protection film is peeled off. (4) you can remove the glue easily. when the glue r emains on the polarizer surface or its vestige is recognized, please wipe them off with absorbent cot ton waste or other soft material like chamois soaked with normal-hexane. 9-6. handling precautions for protection film when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the m odule to sunlight or fluorescent light. keep the temperature between 5 c and 35 c at normal humidity. (2) the polarizer surface should not come in contac t with any other object. it is recommended that they be stored in the contai ner in which they were shipped. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 25 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 appendix a. enhanced extended display identificatio n data (eedid tm ) 1/3 byte (dec) byte (hex) field name and comments value (hex) value (bin) 0 00 header 00 00000000 1 01 header ff 11111111 2 02 header ff 11111111 3 03 header ff 11111111 4 04 header ff 11111111 5 05 header ff 11111111 6 06 header ff 11111111 7 07 header 00 00000000 8 08 eisa manufacture code ( 3 character id ) lgd 30 00110000 9 09 eisa manufacture code (compressed asc ) e4 11100100 10 0a panel supplier reserved - product code 0000h 00 00000000 11 0b ( hex. lsb first ) 00 00000000 12 0c lcd module serial no - preferred but optional ("0" if not used) 00 00000000 13 0d lcd module serial no - preferred but optional ("0" if not used) 00 00000000 14 0e lcd module serial no - preferred but optional ("0" if not used) 00 00000000 15 0f lcd module serial no - preferred but optional ("0" if not used) 00 00000000 16 10 week of manufacture 00 weeks 00 00000000 17 11 year of manufacture 2008 years 12 00010010 18 12 edid structure version # = 1 01 00000001 19 13 edid revision # = 3 03 00000011 20 14 video input definition = digital signal 80 10000000 21 15 max h image size (rounded cm) = 22 cm 16 00010110 22 16 max v image size (rounded cm) = 13 cm 0d 00001101 23 17 display gamma = (gamma*100)-100 = example:(2.2*100) -100=120 = 2.2 gamma 78 01111000 24 18 feature support (no_dpms, no_active off/very low po wer, rgb color display, timing blk 1,no_ gtf) 0a 00001010 25 19 red/green low bits (rxry/gxgy) bf 10111111 26 1a blue/white low bits (bxby/wxwy) b5 10110101 27 1b red x rx = 0.588 96 10010110 28 1c red y ry = 0.347 58 01011000 29 1d green x gx = 0.331 54 01010100 30 1e green y gy = 0.546 8b 10001011 31 1f blue x bx = 0.154 27 00100111 32 20 blue y by = 0.128 20 00100000 33 21 white x wx = 0.313 50 01010000 34 22 white y wy = 0.329 54 01010100 35 23 established timing 1 (00h if not used) 00 00000000 36 24 established timing 2 (00h if not used) 00 00000000 37 25 manufacturer's timings (00h if not used) 00 00000000 38 26 standard timing id1 (01h if not used) 01 00000001 39 27 standard timing id1 (01h if not used) 01 00000001 40 28 standard timing id2 (01h if not used) 01 00000001 41 29 standard timing id2 (01h if not used) 01 00000001 42 2a standard timing id3 (01h if not used) 01 00000001 43 2b standard timing id3 (01h if not used) 01 00000001 44 2c standard timing id4 (01h if not used) 01 00000001 45 2d standard timing id4 (01h if not used) 01 00000001 46 2e standard timing id5 (01h if not used) 01 00000001 47 2f standard timing id5 (01h if not used) 01 00000001 48 30 standard timing id6 (01h if not used) 01 00000001 49 31 standard timing id6 (01h if not used) 01 00000001 50 32 standard timing id7 (01h if not used) 01 00000001 51 33 standard timing id7 (01h if not used) 01 00000001 52 34 standard timing id8 (01h if not used) 01 00000001 53 35 standard timing id8 (01h if not used) 01 00000001 standard timing id display parameters panel color coordinates established timings header vendor / product edid version www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 26 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 appendix a. enhanced extended display identificatio n data (eedid tm ) 2/3 byte (dec) byte (hex) field name and comments value (hex) value (bin) 54 36 pixel clock/10,000 (lsb) 42.2 mhz @ 60.1hz 7c 01111100 55 37 pixel clock/10,000 (msb) 10 00010000 56 38 horizontal active (lower 8 bits) 1024 pixels 00 00000000 57 39 horizontal blanking(thp-ha) (low er 8 bits) 16 0 pixels a0 10100000 58 3a horizontal active / horizontal blanking(thp-ha) (up per 4:4bits) 40 01000000 59 3b vertical avtive 576 lines 40 01000000 60 3c vertical blanking (tvp-ha) (de blanking typ.for de only panels) 17 lines 11 00010001 61 3d vertical active : vertical blanking (tvp-ha) (up per 4:4bits) 20 00100000 62 3e horizontal sync. offset (thfp) 48 pixels 30 00110000 63 3f horizontal sync pulse width (hspw) 32 pixels 20 00100000 64 40 vertical sync offset(tvfp) : sync width (vspw) 3 lines : 5 lines 35 00110101 65 41 horizontal vertical sync offset/width (upp er 2bits) 00 00000000 66 42 horizontal image size (mm) 224 mm e0 11100000 67 43 vertical image size (mm) 126 mm 7e 01111110 68 44 horizontal image size / vertical image size 00 00000000 69 45 horizontal border = 0 (zero for notebook lcd) 00 00000000 70 46 vertical border = 0 (zero for notebook lcd) 00 00000000 71 47 non-interlace, normal display, no stereo, digital s eparate ( vsync_neg, hsync_neg ), de only note : lsb is set to '1' if panel is de-timing only. h/v c an be ignored. 19 00011001 72 48 flag 00 00000000 73 49 flag 00 00000000 74 4a flag 00 00000000 75 4b data type tag (descriptor defined by manufacturer ) 00 00000000 76 4c flag 00 00000000 77 4d descriptor defined by manufacturer 00 00000000 78 4e descriptor defined by manufacturer 00 00000000 79 4f descriptor defined by manufacturer 00 00000000 80 50 descriptor defined by manufacturer 00 00000000 81 51 descriptor defined by manufacturer 00 00000000 82 52 descriptor defined by manufacturer 00 00000000 83 53 descriptor defined by manufacturer 00 00000000 84 54 descriptor defined by manufacturer 00 00000000 85 55 descriptor defined by manufacturer 00 00000000 86 56 descriptor defined by manufacturer 00 00000000 87 57 descriptor defined by manufacturer 00 00000000 88 58 descriptor defined by manufacturer 00 00000000 89 59 descriptor defined by manufacturer 00 00000000 90 5a flag 00 00000000 91 5b flag 00 00000000 92 5c flag 00 00000000 93 5d data type tag ( ascii string ) fe 11111110 94 5e flag 00 00000000 95 5f ascii string l 4c 01001100 96 60 ascii string g 47 01000111 97 61 ascii string 20 00100000 98 62 ascii string d 44 01000100 99 63 ascii string i 69 01101001 100 64 ascii string s 73 01110011 101 65 ascii string p 70 01110000 102 66 ascii string l 6c 01101100 103 67 ascii string a 61 01100001 104 68 ascii string y 79 01111001 105 69 manufacturer p/n(if<13 char--> 0ah, then terminate with asc code 0ah,set remaining char = 20h) 0a 00001010 106 6a manufacturer p/n(if<13 char--> 0ah, then terminate with asc code 0ah,set remaining char = 20h) 20 00100000 107 6b manufacturer p/n(if<13 char--> 0ah, then terminate with asc code 0ah,set remaining char = 20h) 20 00100000 timing descriptor #1 timing descriptor #2 timing descriptor #3 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 27 / 27 lp101ws1 liquid crystal display ver. 1.0 jan. 13, 2009 appendix a. enhanced extended display identificatio n data (eedid tm ) 3/3 byte (dec) byte (hex) field name and comments value (hex) value (bin) 108 6c flag 00 00000000 109 6d flag 00 00000000 110 6e flag 00 00000000 111 6f data type tag ( monitor name, stored as ascii ) fc 11111100 112 70 flag 00 00000000 113 71 monitor name, stored as ascii l 4c 01001100 114 72 monitor name, stored as ascii p 50 01010000 115 73 monitor name, stored as ascii 1 31 00110001 116 74 monitor name, stored as ascii 0 30 00110000 117 75 monitor name, stored as ascii 1 31 00110001 118 76 monitor name, stored as ascii w 57 01010111 119 77 monitor name, stored as ascii s 53 01010011 120 78 monitor name, stored as ascii 1 31 00110001 121 79 monitor name, stored as ascii - 2d 00101101 122 7a monitor name, stored as ascii t 54 01010100 123 7b monitor name, stored as ascii l 4c 01001100 124 7c monitor name, stored as ascii a 41 01000001 125 7d monitor name, stored as ascii 2 32 00110010 126 7e extension flag (# of optional 128 panel id extensio n block to follow, typ = 0) 00 00000000 127 7f check sum (the 1-byte sum of all 128 bytes in this panel id block shall = 0) 8c 10001100 timing descriptor #4 checksum www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of LP101WS1-TLA2

	To Download LP101WS1-TLA2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .